.



 0497-2780227       info@gcek.ac.in       Login

Department of Mechanical Engineering


Major Publications


List of Journal publications by MED faculty in the year 2022-23

SI no. Name of the faculty member Title of the paper Name of the publishing journal DOI (if any)

1.

Dr. Sudheesh kumar C P

Vibration power flow analysis of simply supported uniform beams under moving point loads

Springer, International journal of dynamics and control

https://doi.org/10.1007/s40435-022-00975-9

2.

Dr. Sudheesh kumar C P

Vibration analysis of rotating pre-twisted curved blades under thermal environment

Springer, International journal of dynamics and control

https://doi.org/10.1007/s40435-022-01059-4

3.

Dr. Govindan P

Development of a low-cost volumetric additive manufacturing printer using less viscous commercial resins

Wiley Online Library, Polymer engineering and science

https://doi.org/10.1002/pen.26186

4.

Dr. Govindan P

Impact of

process parameters and heat treatment on fused filament fabricated PLA and PLACF

Springer, International journal of interactive design and manufacturing

https://doi.org/10.1007/s12008-022-01082-x

5.

Dr. Govindan P

Experimental

investigations into the effects of process parameters and UV curing on the tensile

strength of projection based stereolithography

Springer, Strength of materials

https://doi.org/10.1007/s11223-022-00423-1

6.

Dr. Sajeeb A M

Experimental Investigation and Machine

Learning Techniques on Tribological

Characteristics of Blend of Coconut and

Mustard Oil Based Nano-lubricant

Springer: J. Transactions of

Indian Institute of

Metals (2022)

https://doi.org/10.1007/s12666-022-02800-5

 

7.

Dr. Kishor kumar V V

A review on solar photovoltaic-powered thermoelectric coolers, performance enhancements, and recent advances

International Journal of

Air-Conditioning and

Refrigeration-Springer

http://dx.doi.org/10.1007/s44189-023-00022-y

 

8.

Dr. Govindan P

Thermal post processing effects on the polycarbonate acrylonitrile butadiene styrene composites manufactured by fused filament fabrication

Wiley Online Library, Polymer engineering and science

 

https://doi.org/10.1002/pen.26274

 


List of publications in Conference proceedings by MED faculty in the year 2022-23

SI no. Name of the faculty member Title of the paper Name of the Conference

1.

Dr. Sudheesh kumar C P

Experimental and numerical investigations of rain fall induced noise from roofing sheets

Inter-noise 2022 (Online), UK, Proceedings

2.

Dr. Sudheesh kumar C P

A Comparative Study of Two Different Wheel Load Models Used for the Estimation of Dynamic Responses of Bridges

ICAPIE 2022, New Delhi (Online), Proceedings, IOS, Scopus

3.

Dr. Sudheesh kumar C P

Effect of geometrical parameters and material on sound absorption coefficient- A review

ICSEE 2022, Kannur,

Proceedings, SSRN

4.

Dr. Sudheesh kumar C P

Simply supported beam traversed by an undamped oscillator: An investigation of the influence of vehicle-bridge mass ratio on the dynamic responses

ICSEE 2022, Kannur,

Proceedings, SSRN

5.

Dr. Sudheesh kumar C P

A review of vibrational effects of pre-twisted rotating blades

ICSEE 2022, Kannur,

Proceedings, SSRN

6.

Dr. Sudheesh kumar C P

Design of reactive mufflers: A review

ICSEE 2022, Kannur,

Proceedings, SSRN

7.

Dr. Sudheesh kumar C P

A field measurement to investigate the effects of raw material load on noise levels in flour mill units

ICSEE 2022, Kannur,

Proceedings, SSRN

8.

Dr. Sudheesh kumar C P

Design and Fabrication of Personnel Noise Enclosure for a Stone Crushing Unit

INVEST 2022, Mumbai,

Proceedings

9.

Dr. Govindan P

Detachment stress calculation of projection stereolithography based on cohesive zone simulation

ICSEE 2022, Kannur, Proceedings, SSRN

10.

Dr. Govindan P

Effect of process parameters and thermal annealing on mechanical properties of fused filament fabricated specimens

ICSEE 2022, Kannur, Proceedings, SSRN

11.

Dr. Govindan P

Finite element based numerical modelling of near-dry EDM with glycerin-air dielectric mixture

International conference on materials science and engineering (ICMSE 2022)

12.

Dr. Kishor kumar V V

A Review on Solar Box Cooker and

Utilization of Phase Change Material as a Heat Storage

ICSEE 2022, Kannur, Proceedings, SSRN

13.

Dr. Kishor kumar V V

Numerical Simulation of an Element of Thermoelectric Cooler for the optimized design

ICSEE 2022, Kannur, Proceedings, SSRN

14.

Dr. Kishor kumar V V

Review on Hybrid Solar-Biomass Dryer for food processing integrated with Sun Tracking system

ICSEE 2022, Kannur, Proceedings, SSRN

15.

Prof. Jose M J

Residual Stress and Distortion in Gas Metal Arc Based Additive Manufacturing

ICSEE 2022, Kannur, Proceedings, SSRN

16.

Prof. Jose M J

 

Effects of FSSW Process Parameters on Microstructure and Strength of Welds Made of TRIP Steel: A Review

ICSEE 2022, Kannur, Proceedings, SSRN

17.

Prof. Jose M J

 

Application of Sysweld Software in Finding Weld Residual Stress: A Review

ICSEE 2022, Kannur, Proceedings, SSRN

18.

Prof. Priyak N K

Experimental investigation of torrefaction on Auger based Reactor

ICSEE 2022, Kannur, Proceedings, SSRN

19.

Prof. Priyak N K

Review on Preparation of Biodiesel from Algae

ICSEE 2022, Kannur, Proceedings, SSRN

List of Journal publications by MED faculty in the year 2021-22

SI no.

Name of the faculty member

Title of the paper

Name of the publishing journal

DOI (if any)

1.

Dr. Govindan P

Property Enhancement Approaches Of Fused Filament Fabrication Technology: A
Review

Wiley Online Library, Polymer engineering and science

https://doi.org/10.1002/pen.25948

2.

Dr. Govindan P

Effects Of Process Parameters And Annealing On The Tensile Strength Of 3D

Printed Carbon Fiber Reinforced Polylactic Acid

Elsevier Materialstoday Proceedings

https://doi.org/10.1016/j.matpr.2022.02.142

 

3.

Prof. Jose M J

Demonstrating Antenna Miniaturization For Radiolocation Applications Using Double Elliptical Patches

Defence Science Journal, International Journal

https://doi.org/10.14429/dsj.71.16276

 

4.

Dr. Govindan P

Investigations Into The Effect Of Thermal Annealing On Fused Filament Fabrication Process

Advances in materials and processing technologies

https://doi.org/10.1080/2374068X.2021.1946753

5.

V V Kishor Kumar

Hydrodynamic And Heat Transfer Characteristics Of Miniature Stirling Cryocooler Regenerators- A Review

International journal of air-conditioning and refrigeration

10.1142/S2010132521300068


List of publications in Conference proceedings by MED faculty in the year 2021-22

SI no.

Name of the faculty member

Title of the paper

Name of the Conference

1.

Dr. Sreejith B

Vehicle Routing In Perishable Supply Chain: A Case Study

 International Conference on Operations and Supply Chain Management (ICOSCM 2022), SIOM, Nashik, 2022.

2.

Dr. Sreejith B

Performance Analysis Of Modified Nozzle-Diffuser Augmented Horizontal Axis Hydrokinetic Turbine

 Proceedings of the International Conference on Emerging Trends in Engineering, Yukthi-2021, Kozhikode, India

3.

Dr. Sreejith B

A Case Study Of Perishable Vehicle Routing Problem With Time Windows And Solution Techniques

8th pan IIM World Management conference, IIM Kozhikode, India, 2021

List ofJournal publications by MED faculty in the year 2020-21

SI no.

Name of the faculty member

Title of the paper

Name of the publishing journal

DOI (if any)

1.

Dr. Sudheesh kumar C P

Investigation of the influence of coloured illumination on surface texture features: A Machine vision approach

Elsevier Measurement

https://doi.org/10.1016/j.measurement.2019.107297

 

2.

Dr. Govindan P

Current state and future scope of additive

manufacturing technologies via vat photopolymerization

Elsevier Materialstoday Proceedings

https://doi.org/10.1016/j.matpr.2020.11.225

 

3.

Dr. Govindan P

Optimized projections and dose slices for the volumetric additive manufacturing of three-dimensional

objects

Elsevier Materialstoday Proceedings

https://doi.org/10.1016/j.matpr.2020.10.807

 

4.

Dr. Govindan P

Prediction of the tensile strength

of polylactic acid fused deposition models using artificial neural network

technique

Elsevier Materialstoday Proceedings

https://doi.org/10.1016/j.matpr.2020.01.199

 

5.

Dr Sooraj P

Prediction of the tensile strength

of polylactic acid fused deposition models using artificial neural network

technique

Elsevier Materialstoday Proceedings

https://doi.org/10.1016/j.matpr.2020.01.199

 

6.

Prof. Muhammed Anees V V

Simulation Modelling and Analysis of Due Date Assignment Methods and scheduling Decision Rules in a Flexible manufacturing system

Advances in Material Science and Mechanical Engineering

 

7.

Dr. Abdul Nazar K P

Simulation Modelling and Analysis of Due Date Assignment Methods and scheduling Decision Rules in a Flexible manufacturing system

Advances in Material Science and Mechanical Engineering

 

8.

Dr. Sajeeb A M

Blend of Extracts of Hibiscus Flowers and Used Cooking Oil as Bio-Lubricant

Transactions of the Indian Institute of Metals (2022): 1-10.

10.4271/2020-28-0523

9.

Prof. JOSE M J

Predicting Performance Characteristics of Double Elliptical Micro-Strip Patch Antenna for Radiolocation Applications Using Response Surface Methodology

Progress In Electromagnetics Research

http://dx.doi.org/10.2528/PIERB20051504


List of publications in Conference proceedings by MED faculty in the year 2020-21

SI no.

Name of the faculty member

Title of the paper

Name of the Conference

1.

Dr. Abdul Nazar K P

Multi Objective Parameter Optimization of End Milling Operation on AA5083

International Conference on Power Electronics and Renewable Energy Applications (PEREA)

2.

Prof. JOSE M J

Fuzzy Logic and Its Recent Applications on Welding Problems

International Conference On Energy And Environment (ICEE 2021) Jyothi Engineering College , Thrissur

3.

Prof. JOSE M J

Backpropagated Neutral Network Model For TTT-TIC Welding Process

2020 international conference on power electronics and energy

List ofJournal publications by MED faculty in the year 2019-20

SI no. Name of the faculty member Title of the paper Name of the publishing journal DOI (if any)
1. Dr. Sreejith B Solar desalination using modified parabolic trough concentrator Book chapter, Green buildings and sustainable engineering, Springer transactions in Civil and Environmental Engineering, pp 257 - 271, 2020 https://doi.org/10.1007/978-981-15-1063-2_20

2. Dr. Sajeeb A M Assessment of viscosity of coconut -oil-based CeO2 / CuO hybrid nano- lubricant using artificial neural network

Book chapter, advanced engineering optimization through intelligent techniques, advances in intelligent systems and computing 949,

https://doi.org/10.1007/978-981-13-8196-6_62
3. Dr. Sajeeb A M Experimental studies on viscosity and tribological characteristics of blends of vegetable oils with CuO nanoparticles as additives IET Digital Library 10.1049/mnl.2018.5595
4. Dr. Sajeeb A M Comparative evaluation of lubricant properties of biodegradable blend of coconut and mustard oil Elsevier journal of cleaner production https://doi.org/10.1016/j.jclepro.2019.118255
5. Dr. Sajeeb A M Tribological assessment of vegetable oil based CeO2/CuO hybrid nano-lubricant Proc IMechE, , Part J: Journal of Engineering Tribology 10.1177/135065119899208
6. Jose M J Double – elliptical shaped miniaturized microstrip patch antenna for ultra-wide band applications Progress in electromagnetics research

List of publications in conference proceedings by MED faculty in the year 2019-20

SI no. Name of the faculty member Title of the paper Name of the Conference
1 Prof. Priyak N K Modelling of a gasifier using cycle-tempo for SOFC Applications AIP Conference proceedings 2134, 03008(2019)

SI no.

Name of the faculty member

Title of the paper

Name of the publishing journal

DOI (if any)

1.

Dr. Govindan P

Property Enhancement Approaches Of Fused Filament Fabrication Technology: A
Review

Wiley Online Library, Polymer engineering and science

https://doi.org/10.1002/pen.25948

2.

Dr. Govindan P

Effects Of Process Parameters And Annealing On The Tensile Strength Of 3D

Printed Carbon Fiber Reinforced Polylactic Acid

Elsevier Materialstoday Proceedings

https://doi.org/10.1016/j.matpr.2022.02.142

 

3.

Prof. Jose M J

Demonstrating Antenna Miniaturization For Radiolocation Applications Using Double Elliptical Patches

Defence Science Journal, International Journal

https://doi.org/10.14429/dsj.71.16276

 

4.

Dr. Govindan P

Investigations Into The Effect Of Thermal Annealing On Fused Filament Fabrication Process

Advances in materials and processing technologies

https://doi.org/10.1080/2374068X.2021.1946753

5.

V V Kishor Kumar

Hydrodynamic And Heat Transfer Characteristics Of Miniature Stirling Cryocooler Regenerators- A Review

International journal of air-conditioning and refrigeration

10.1142/S2010132521300068

SI no.

Name of the faculty member

Title of the paper

Name of the Conference

1.

Dr. Sreejith B

Vehicle Routing In Perishable Supply Chain: A Case Study

 International Conference on Operations and Supply Chain Management (ICOSCM 2022), SIOM, Nashik, 2022.

2.

Dr. Sreejith B

Performance Analysis Of Modified Nozzle-Diffuser Augmented Horizontal Axis Hydrokinetic Turbine

 Proceedings of the International Conference on Emerging Trends in Engineering, Yukthi-2021, Kozhikode, India

3.

Dr. Sreejith B

A Case Study Of Perishable Vehicle Routing Problem With Time Windows And Solution Techniques

8th pan IIM World Management conference, IIM Kozhikode, India, 2021

2 Jose M J Tool pin profiles and the quality of welds in friction stir welding of aluminium alloy 4th international conference on materials, mechanics and management (IMMM2020) 3 Jose M J Double – elliptical micro-strip patch antenna for higher design flexibility and miniaturization International journal of engineering and advanced technology (IJEAT) IISN:2249-8958 4 Jose M J DESIGN techniques for elliptical micro-strip patch antenna and their effects on antenna performance International journal of innovative technology and exploring engineering( IJITEE) ISSN:2278-3075


Vineesh, K. P., et al. "Non-uniformity in braking in coaching and freight stock in Indian Railways and associated causes." Engineering Failure Analysis 59 (2016): 493-508.

Vakkalagadda, M. R. K., et al. "Locomotive wheel failure from gauge widening/condemning: Effect of wheel profile, brake block type, and braking conditions." Engineering Failure Analysis 59 (2016): 1-16.

Kumar, C P Sudheesh, C. Sujatha, and K. Shankar. "Vibration of simply supported beams under a single moving load: a detailed study of cancellation phenomenon." International Journal of Mechanical Sciences 99 (2015): 40-47.

Abdul Nazar, K. P., and V. Madhusudanan Pillai. "A bit-wise mutation algorithm for mixed- model sequencing in JIT production systems." International Journal of Production Research 53.19 (2015): 5931-5947.

Vakkalagadda, M. R. K., K. P. Vineesh, and V. Racherla. "Estimation of railway wheel running temperatures using a hybrid approach." Wear 328 (2015): 537-551.

Vakkalagadda, M. R. K., et al. "Locomotive wheel failure from gauge widening/condemning: Finite element modeling and identification of underlying mechanism." Engineering failure analysis 57 (2015): 143-155.

Maheshkumar, P., and C. Muraleedharan. "Minimization of entropy generation in flat heat pipe." International Journal of Heat and Mass Transfer 54.1 (2011): 645-648.

Sooraj, P., and Pratap K J Mohapatra. "Modeling the 24-h software development process." Strategic Outsourcing: An International Journal 1.2 (2008): 122-141.